法规动态 | 有关G-Mark认证最新通知

发布时间：2025-05-20

根据GSO发布有关G-Mark认证报告认可原则的最新通知，自2024年7月31日起，所有申请G-Mark认证证书的报告都须满足通告要求（如下），否则将不予接受。

Upon the notification from GSO, updated Requirements on recognition of Test Reports for G Mark Certification are implemented. Starting from 31st, July, 2024, certification applications which are failing to comply with the requirements as stipulated below shall be rejected.

1测试结果接受时限要求 Maximum Acceptance Period for Test Results

a) 用于申请G-Mark认证的测试结果获取时间距离申请提交时不应超过三年。

Test results shall be generally considered valid only if obtained within a period no longer than 3 years prior to the date of the application for G-Mark certification to the Notified Body.

b) 意指自测试结束时间起算至申请提交时不超过三年。

In summary, it is calculated from the test completion date to the certification submission date, which shall be not exceeding 3 years.

c) 测试报告的签发日期可能晚于测试结束日期，起算日期始终以测试结束日期为起点。

The issue date of the testing report may be later than the date of completion of testing, which is the date to be considered for calculating the 3 years period.

d) 测试报告的重新签发应满足ISO/IEC 17025的要求，如，勘误、补充数据等。

注：部分实验室在三年后，未对产品重新进行测试，重新签发测试报告引用原报告测试数据，此操作是不可接受的。

Any re-issuance of test report shall fulfill ISO/IEC 17025 relevant requirements. For example, test reports shall be re-issued only for the correction of errors and the inclusion of omitted data at the time of tests. The practice which consists, in some accredited laboratories, of re-issuing a test report under accreditation coverage after the end of three years from the end date of performing the test(without re-testing) is not permitted, even with a clear reference to the initial report that it replaces. 

e) 除了测试结果的时间会影响报告的认可，测试所使用的标准版本也会影响报告的认可，应关注测试使用的标准版本为GSO所采用的现行有效版本。

The validity periods of the applied Harmonized Standards are not affected by this rule and must always be observed.

2测试报告与申请认证产品的追溯性 Traceability of the test reports to the products applied for certification

为明确测试报告与认证产品的关联性，以下追溯内部须体现在报告中：

To ensure the unambiguous association of test reports with the certified products, the following traceability requirements are now mandated on the test report:

a) 测试报告应明确用于申请认证的相关制造商、品牌、产品型号。

Test reports shall explicitly reference the manufacturer, brand, and model of the products applied to be certified for G-Mark.

b) 生产地址若在报告中体现，应与认证申请中的信息一致。

The manufacturing location (factory), if indicated in the test report, shall match the information provided in the application for certification.

c) 测试报告应包含足够的测试样品照片信息，尤其是系列型号申请的测试报告，以便认证机构能够充分评估认证产品。

The test report shall include sufficient photo documentation of the tested products to permit the Notified Body to identify the applied product (model), in particular in case of family models or product series.

3产品一致性声明的使用PID-Product Identity Declaration

a) 若测试报告中的产品型号与申请认证的产品型号未直接对应，申请人应提供产品一致性声明（PID/DOI-Declaration of Identity）说明测试型号与认证型号的关系、相同点及差异点，并包含关联的所有测试报告信息。

In case where the test report does not directly correspond to the product model applied for certification, a Product Identity Declaration (PID) or Declaration of Identity (DOI) shall be provided showing the correlation, similarities and differences between the products applied for certification and the tested products and include the references to all test reports that show the relevant test results.

b) PID/DOI应由制造商或其授权代表签字（如：技术负责人或管理代表），同时应以显示签署公司的官方信息（含公司名字和地址）的正式信函签署。

The PID/DOI shall be signed by an authorized person on behalf of the manufacturer or his authorized representative (e.g. technical responsible or top management representative) and issued on an official letter showing the name an address of the issuing company.